最新のNCSC-Level-1問題集で試験を準備する

Nutanix NCSC-Level-1 試験概要:

Nutanix NCSC-Level-1 試験シラバストピック:

Nutanix Certified Services Consultant (NCSC): Level 1 認定 NCSC-Level-1 試験問題：

1. After finishing foundation on an AHV cluster, a consultant is preparing to plug into the customer network given the following set of requirements:
* All network traffic on trunks is tagged
* Customer is using LACP
* A native VLAN is not in use
Which set of commands should the consultant use to ensure cluster connectivity on customer equipment?

A) change_cvm_vlan 0
ovs-vsctl set port br0 tag=0
ovs-vsctl set port br0-up bond_mode=balance-tcp
B) change_cvm_vlan 10
ovs-vsctl set port br0 tag=10
ovs-vsctl set port br0-up bond_mode=balance-tcp
C) change_cvm_vlan 10
ovs-vsctl set port br0 tag=10
ovs-vsctl set port br0-up bond_mode=balance-slb
D) change_cvm_vlan 0
ovs~vsctl set port br0 tag=0
ovs~vsctl set port br0-up bond_mode=active-backup

2. A consultant needs to verify the make and model of the systems that will be imaged with Foundation. The consultant does not have the Bill of Materials (BOM) available to review.
When should the consultant verify the make and model to prepare for the cluster deployment?

A) Upon arriving on-site
B) While conducting the Tech Review Call
C) When reviewing the Statement of Work (SOW)
D) During the Foundation Process

3. A consultant successfully completes a Foundation using a flat switch. The consultant then works with the customer to move the cluster over to their production network. After the move, the CVMs and hypervisors can no longer communicate, which prevents the cluster from starting.
Which option should be used to resolve this issue?

A) If the IPMI is in use, check that the IPMI can ping the default gateway over IPv6.
B) Verify that IPv6 Link Local and DHCP is enabled on all switch ports.
C) Make sure that the IPMI and CVM VLAN is manually tagged on the Host and CVM.
D) If using VLANs, confirm the hypervisor/CVM VLAN is set as Native on the switch ports.

4. A customer is running out of storage in an ESXi cluster. The customer wants to add storage without paying for an additional hypervisor license.
Which option should the consultant recommend to meet the requirement?

A) Buy a new node to meet the requirements of the storage-only node specifications.
B) Convert the cluster to AHV to support storage-only node requirements.
C) Edit the factory_config.json file to configure the node as storage-only and then expand the cluster in Prism
D) Select the storage-only checkbox during Foundation and then expand the cluster in Prism.

5. A consultant configures a Nutanix cluster and integrates the hosts into vCenter using VMware best practices. The customer has requested that the Nutanix cluster only have a single datastore.
Upon configuring the cluster per the customer requirements, vCenter displays an alert regarding the heartbeat datastore. The consultant adds the das.ignoreInsufficientHbDatastore value = true rule. The container can be seen from each host, but the alert remains active.
What should the consultant do to resolve this issue?

A) Make sure the DRS setting is turned on.
B) Turn off and then turn back on HA.
C) Create a second container.
D) Whitelist the vCenter IP address within Prism.

質問と回答：