Avaya ERS 8000 and Avaya VSP 9000 Implementation 認定 6103 試験問題:

1. When configuring a new Ethernet Routing Switch (ERS) 8000 using the default interface, the attempt to load an ACLI configuration fails because the default interface is the CLI.
How is the ACLI interface obtained?

A) by use the abort command, and entering 'no' at the default interface prompt
B) by changing the ACLI boot flag and saving the boot configuration file
C) by changing the interface type in the config.cfg file
D) by exiting the CLI and choosing ACLI at the interface manager prompt

2. For maximum cooling, how many cooling modules does a Virtual Services Platform (VSP) 9000 chassis need?

A) 2 inserted from the front and 4 from the back
B) 2 inserted from the front and 2 from the back
C) 2 inserted from the front
D) 2 inserted from the back

3. A campus network requirement is to introduce Virtual Routing and Forwarding (VRF) in the existing Virtual Services Platform (VSP) 9000 core. The technician needs to configure VRF on the VSP 9000.
Which statement represents the proper order for configuring a new VRF?

A) Create a VRF, add an IP address, create a new VLAN, and move the VLAN to the new VRF.
B) Create a new VLAN, add an IP address, create a VRF, and move the VLAN to the new VRF.
C) Create a VRF, create a new VLAN, move the VLAN to the new VRF, and add an IP address.
D) Create a VRF, create a new VLAN, add an IP address, and move the VLAN to the new VRF.

4. Once you have enabled the web server within the system for EDM access, what is the syntax to allow only secure connections?

A) web-server secure-only
B) web-server ssh session only
C) web-server secure enable
D) web-server ssh enable

5. Which ACLI command is used to display SMLT port configuration?

A) show mlt {fastethernet|gigabitethernet|mlt|pos}
B) show smlt {fastethernet|gigabitethernet|mlt|pos}
C) show port smlt {fastethernet|gigabitethernet|mlt|pos}
D) show port info mlt {fastethernet|gigabitethernet|mlt|pos}

質問と回答：