IBM Assessment: Power Systems with POWER7 and IBM i Technical Sales Skills -v2 認定 A4040-226 試験問題:

1. When virtualizing physical tape with IBM i Virtual Partition Manager (VPM) to client partitions, which statement is correct?

A) Only one client partition can use a virtualized device at a time.
B) IBM i client partitions can use supported tape libraries in Random mode.
C) The hosting IBM i partition Network Storage Description (NWSD) default settings must be altered to allow use of virtualized tape.
D) Only tape drives located in the CEO are supported for virtualization to client partitions.

2. A customer wants to replace their existing system with a POWER7+ server with Storwize V7000 and is considering Solid State Drives (SSDs) for performance reasons.
Which tool is needed to determine if SSDs could improve performance?

A) Disk Magic
B) SSD Analyzer Tool for IBM i
C) Performance Tools Upgrade Analyzer
D) SSD Candidate Screening

3. Which of the following was added in IBM i 7.1 to reduce disk protection recovery time?

A) Remote hot spare
B) RAID-5 with hot spare
C) RAID-6 with hot spare
D) Hot-spare for mirror-protected disk

4. A customer with a 2-core POWER6 520 running IBM i 6.1.1 wants to move to a 4-core POWER7+
720. Which of the following is a consideration?

A) Virtual tape images can be used to migrate from the 520 to the 720.
B) IBM i on the 520 must be upgraded to 7.1 with TR6 prior to the upgrade.
C) The system serial number will change.
D) ANZOBJCVN must be run and any identified issues resolved prior to the move.

5. In which situation is the FC #EB34 IBM i 6.1.1 Native I/O feature required?

A) To allow a POWER7+ system to run external I/O
B) To implement a single-image system on a POWER7+ server running only IBM i 6.1
C) To enable a POWER7 system to host a Linux partition
D) To configure a POWER6+ or POWER7 system to run client I/O for an IBM i 6.1 partition

質問と回答：