Nutanix Certified Services Consultant (NCSC): Level 1 認定 NCSC-Level-1 試験問題:

1. A consultant creates a new cluster using ESXi as the hypervisor. After creating the cluster, the consultant begins to run Life Cycle Manager (LCM) updates. During the LCM upgrade pre-checks, an error is returned.
Which configuration is causing this issue?

A) ESXi cluster HA is enabled.
B) ESXi cluster admission control is enabled.
C) ESXi cluster DRS is enabled.
D) ESXi cluster admission control is disabled.

2. After uploading a hypervisor ISO during the Foundation process, a consultant sees a message that the MD5 sum for the hypervisor is not found in the Whitelist file.
Which step should the consultant take next to resolve this issue?

A) Check the hypervisor version in the Nutanix Compatibility Matrix.
B) Download the hypervisor ISO again from the vendor website.
C) Restart the Foundation process and upload the hypervisor again.
D) Download the latest hypervisor ISO whitelist file from Nutanix portal.

3. A customer buys ultimate licensing and wants to use the built-in Nutanix software encryption on their new AHV cluster. The customer needs to create three storage containers and asks the consultant to complete the process as fast as possible.
In which order should the cluster be deployed?

A) Create Cluster -> Install License Key -> Create Storage Containers -> Encrypt Cluster
B) Create Cluster -> Encrypt Cluster -> Install License Key -> Create Storage Containers
C) Create Cluster -> Create Storage Containers -> Encrypt Cluster -> Install License Key
D) Create Cluster -> Install License Key -> Encrypt Cluster -> Create Storage Containers

4. For a new AHV cluster installation, a customer has 20 NX-8155-G6 nodes with quad port SFP NICs.
The customer wants to meet the following guidelines:
* Take advantage of all available 10GbE links
* Achieve maximum throughput per VM
* Use of redundant ToR switches
* Fastest reconvergence during link failure
How should the load balancing be configured on the host?

A) ovs-vsctl set port br0-up bond_mode=active-backup
ovs-vsctl set port br0-up other_config:bond-rebalance-interval=30000
B) ovs-vsctl set port br0-up bond_mode=balance-slb
ovs-vsctl set port br0-up other_config:bond-rebalance-interval=30000
ovs-vsctl set port br0 tag=10
C) ovs-vsctl set port br0-up bond_mode=balance-slb
D) ovs-vsctl set port br0-up other_config:lacp-fallback-ab=true
ovs-vsctl set port br0-up lacp=active
ovs-vsctl set port br0-up bond_mode=balance-tcp

5. A customer has an ESXi Cluster with two 10GbE NICs on each node with the following requirements:
* Solution must follow Nutanix Best Practices
* Network configuration should be redundant
* A vSphere Standard Switch must be utilized
Which load balancing method should be used?

A) Route based on IP hash
B) Route based on originating port ID
C) Route based on source MAC hash
D) Route based on physical NIC load

質問と回答：