最新のH12-831_V1.0-ENU問題集で試験を準備する

Huawei H12-831_V1.0-ENU 試験概要:

Huawei H12-831_V1.0-ENU 試験シラバストピック:

Huawei HCIP-Datacom-Advanced Routing & Switching Technology V1.0 認定 H12-831_V1.0-ENU 試験問題：

1. Which of the following commands can be configured on an IS-IS Level-1-2 device to prevent the Level-1 device from generating a default route?

A) attached-bit advertise always
B) attached-bit avoid-learning
C) attached-bit advertise never
D) import-route isis level-2 into level-1

2. In an MPLS L3VPN network, when forwarding traffic between two CE sites across the MPLS backbone, how many labels are typically imposed on the packet within the core?

A) Two labels (outer transport + inner VPN label)
B) Three labels
C) One label (LDP transport only)
D) One label (VPN label only)

3. R1 and R2 use the directly connected interface to establish an EBGP neighbor relationship, and R1 introduces 2000::1/128 into BGP.

By default, the next hop address for R2 to reach 2000::1/128 is ().

4. In the network shown in the figure, adjacent routers use directly connected interfaces to establish EBGP neighbor relationships. The Router ID of each device is 10.0.XX, and the AS number is
6500X, where X is the router number. R1 and R4 both have static routes to 192.168.1.0/24, which are introduced into BGP through import.

If the "ageregate 192.168.1.016 detail-suppresed command" is configured on R1, which of the following is the traffic path from R3 to 192.168.1.0/24?

A) R3-R5-R4
B) R-R6-R5-R1
C) R3-R5-R1
D) R3-R2-R1

5. In the network shown in the figure, adjacent routers use directly connected interfaces to establish EBGP neighbor relationships. The AS number is 6500X, where X is the router number. R1 and R4 both have static routes to 192.168.1.0/24, which are introduced into BGP through import. The maximum number of equal-cost routes configured for EBGP load sharing on R3 is 8.

By default, the number of equal-cost routes from R3 to 192.168.1.0/24 is which of the following?

A) 2
B) 1
C) 8
D) 3

質問と回答：