H3C Deploy and Manage the H3C CAS virtualization platform V3.0 認定 GB0-713-ENU 試験問題:

1. The following modification of virtual switch port information is incorrect.

A) To modify the host management vswitch address, you need to delete the host from the CVM page.
B) Changing the host storage vswitch address requires suspending the shared storage pool
C) To modify the host management vswitch name, you can directly modify it on the CVM page.
D) Modify the host service vswitch binding physical port can be modified directly on the CVM page

2. Which of the following errors regarding virtual machine migration is

A) When the virtual machine only changes the host, the destination host must be able to access the image file of the virtual machine
B) Changing the host and storage means migrating the virtual machine to another host and migrating the virtual machine image file to other storage on the host. Only offline migration is supported.
C) Virtual machine migration refers to manually migrating a virtual machine to a different host and data storage, supporting offline migration and online migration
D) Virtual machine migration includes changing the host, changing the storage, changing the host and storage

3. Which of the following statements about virtual machine templates is correct?

A) A virtual machine template is a copy of a virtual machine that is used to easily create and configure multiple new virtual machines.
B) The number of CPUs, memory size, and storage capacity in the virtual machine template cannot be modified
C) There are two ways to create a virtual machine template: convert to a template and clone to a template. The clone to template must be executed when the virtual machine is shut down.
D) The virtual machine template is saved in the "/vms/templet" local directory of the CVM host by default

4. Which of the following statements about configuring a virtual switch is incorrect?

A) The uplink port of the virtual switch allows all VLANs to pass
B) When adding a virtual switch, you must bind a physical interface, and when binding multiple physical interfaces, you must configure link aggregation mode and load sharing mode.
C) The virtual machine uses the vNet0 port of the virtual switch, and the port is configured with VLAN100. Then the physical switch port connected to the virtual switch must allow VLAN100 to pass through, otherwise the virtual machine network will be unavailable.
D) The storage virtual switch must be configured with a P address, otherwise the CVK host cannot mount the iP SAN storage through the storage virtual switch.

5. Which of the following statements about virtual machine mounting storage is correct?

A) The virtual machine can mount the storage volume on the CVK as a block device
B) You can create a new file in the CVK mounted storage pool and mount it to the virtual machine for use
C) Multiple virtual machines can mount the same disk file
D) The virtual machine can directly access physical storage mounts through the network

質問と回答：