最新の1Y0-740問題集で試験を準備する

Citrix 1Y0-740 試験概要:

Citrix 1Y0-740 試験シラバストピック:

Citrix WANScaler 4.2: Administration 認定 1Y0-740 試験問題：

1. Scenario: An organization has a set of bulk FTP transfers. The administrator would like for the FTP traffic to use as much available bandwidth as it needs with at least 15% of the link guaranteed during peak traffic times. As traffic diminishes overnight, FTP traffic should claim the unused bandwidth.
Which two steps should the administrator take to configure QoS in this environment?
(Choose two.)

A) Assign the service class for FTP to Queue B and all other traffic in the environment should be assigned to Queue A.
B) Use hardboost bandwidth schedule to increase the bandwidth limit at night.
C) Configure additional bandwidth settings based on the time of the day.
D) Enable partial bandwidth and set aside 85% of the link speed.
E) Configure two QoS queues, Queue A and Queue B, and assign 15% of the bandwidth set aside for acceleration to Queue B and assign the remaining 85% of the available bandwidth set aside for Queue A.

2. WANScaler provides SNMP support for __________, __________ and __________.
(Choose the three correct options to complete the sentence.)

A) GET Data method
B) version 3
C) PUT Data method
D) version 1
E) version 2

3. Which three options are true with regard to deploying a WANScaler Client environment?
(Choose three.)

A) The WANScaler Controller must be placed on the same site as the server.
B) The WANScaler Controller must be on an IP address reachable by all WANScaler Clients and WANScaler appliances.
C) The WANScaler Client will not offer any benefit when it is on the same LAN with the server.
D) Citrix Access Gateway Standard Edition 4.0 and Citrix Access Gateway Advanced Edition 4.0 are the only SSL VPNs interoperable with the WANScaler Client.
E) Firewalls must be configured to not strip TCP options.

4. Scenario: A Network Administrator is implementing WANScaler appliances in an environment that consists of several branch offices and a single data center. The administrator wants the data center WANScaler appliance to communicate with the WANScaler appliances at the various branch offices. Only traffic from a branch office, destined for the data center will be accelerated by the WANScaler appliances; branch office to branch office traffic will not pass through the data center appliance.
Which deployment topology should the administrator implement?

A) Hub-and-spoke
B) Point-to-point
C) Spoke
D) Mesh

5. Scenario: An administrator configures bandwidth settings for a site after referring to the usage graph and finding that there is a significant gap between accelerated line usage and the accelerated data transferred. The administrator decides to test optimal data transfer rates between WANScaler appliances using iPerf. What must the administrator do in order to test end-to-end achievable bandwidth using iPerf?

A) Start iPerf on the client and run the iPerf test from the iPerf server by adding the IP address of the client, and selecting an interface and test duration. Test transfer bandwidth to the client and view the resulting information in the System Status page in a new window.
B) Run the iPerf service, start iPerf on the client and run the iPerf test from the iPerf server by adding the name of the client, and selecting an interface and test duration. Test transfer bandwidth to the iPerf server and view the resulting usage graph page in a new window.
C) Start the iPerf server and run the iPerf test from the client by adding the IP address of the iPerf server, and selecting an interface and test duration. Test transfer bandwidth to the iPerf server and view the resulting usage graph page in a new window.
D) Run the iPerf service, start the iPerf server and run the iPerf test from the client by adding the name of the iPerf server, and selecting an interface and test duration. Test transfer bandwidth to the client and view the resulting information in the System Status page in a new window.

質問と回答：